CT Contrast Injector
Innovation being the key to the advanced technologies incorporated in CT contrast injectors . These contrast injector systems are outlined to provide streamlined workflow, safety advancements of the patients and efficient operations clubbed with the data management of the injection and the injection protocol assessed on a extensively. All these aspects lead to a careful and precise evaluation of the patient and deciding of the medication. The minute details are made so visible to the normal eyes,that the contrast agents are very distinguishing between the organs or the tissue in radiological diagnostics. The operational ease, quality and safety, sterile usage of products are indispensable in diagnostic everyday clinical control. Such equipments are successfully used in radiological surgeries and clinical usage for several years.
The Technology used in CT contrast injectors is based on a roll pump injection methodology. The roll pump drive consists of two parts in the tubing system, one the pumping tube and the other is the patient tubing. The period of 24 hours the pump tubing can be used several times. Both the pump tubing and the patient tubing are connected through a lock connection. The patient tubing is changed for each patient. The length of the patient tubing varies according to the need. The injection is direct to the contrast container, this facilitates faster changeover of the patients if there is high volume of examination.
The best features of the CT contrast injectors are the monitoring of the real time pressure injection of the injector. The swelling of the vascular rupture is reduced. When the occlusion occurs the start and stop of the operation is indicated by an alarm. The air embolism is reduced efficiently with the help of air exhaust confirmation from the device. The injection protocol has 8stages of injection, providing 99 protocols to store, recall and make changes. The contrast injector is built in such way that it is mobile and responsive in quick movement of the device.
The CT contrast injector from IVES Healthcare comes with a specification of Sino power-S or Sino power-D and the syringe used is single and dual with the syringe size of 200ml each. The entire equipment weighs 32kg to 35kg and its power rating is between AC 220V and at a frequency of 50Hz with a variation of 10% positively and negatively. The environmental working condition of the contrast injector +5degrees to+40 degrees and an atmospheric humidity of < 93%. The injection liquid low rate is 0.1 per second to 10ml per second with a pressure limit of 100 to 300 increments in 50psi (pound per square inch). The key value observation, KVO is 0.1ml/second. The scan and the injection delay is 0 to 600seconds. The phases of injection are in 8 stages with 99 programmable protocols As a customer driven production we are dedicated to provide and demonstrate to the medical Industry the best solution and products